Sino Power Solutions Pte.Ltd.-KYN61-40.5 AC Metal-clad Withdrawable Switchgear-KYN61-40.5 AC metal-clad withdrawable switchgear (hereinafter referred toas switchgear) is three-phase AC, 50Hz, rated voltage 40.5kV indoor powerdistribution device. lt is used for power plants, substations and industrial andmining enterprises to receive and distribute electricity, it can control, protectand detect circuits, and can also be used in places with frequent operations.-KYN28A-12(GZS1)AC Metal-clad Withdrawable Switchgear-KYN281-12(GZS1) AC metal-clad withdrawable switchgear (hereinafter referred toas switchgear)is a complete power distribution device for three-phase AC 50Hzsingle busbar and single busbar sectional system, mainly used in power plants,small and medium generator power transmission, power distribution of industrialand mining enterprise, power transformation, transmission of substation and largeHV motor starts to achieve the purpose of control, protection and monitoring.-liquid-cooled energy storage cabinet-It has full-scenario coverage, ultimate security, modular and flexible expansion, AI intelligent management and global ecological advantages.-LIQUID COOLING BATTERY CABIN-The liquid-cooled battery cabin consists of a 20-foot customized container, which contains a liquid-cooled PACK, BMS battery management system, liquid cooling unit, fire protection, etc.-S-M.RL STERIC IRON CORE OILIMMERSED TRANSFORMER-The S13-M.RL, S20-M.RL, and S22-M.RL series products are three-phase three-dimensional wound core oil-immersed transformers. Due to the perfect three-phase symmetrical body structure, the magnetic circuits between the three phases are completely symmetrical and equal in length, overcoming the defects of stacked cores. The cores are continuously rolled, with almost no joints inside and tightly wound by machines, making the transformers have the characteristics of low no-load loss, small no-load current, low noise, and significant power saving effect. It improves the voltage quality and power supply reliability, is a green energy-saving equipment that is beneficial to environmental protection, and is the latest product promoted and used in urban and rural power grid technical transformation projects.-electric bicycle charger-ac ev charger-KYN61-40.5 AC Metal-clad Withdrawable Switchgear-KYN61-40.5 AC metal-clad withdrawable switchgear (hereinafter referred toas switchgear) is three-phase AC, 50Hz, rated voltage 40.5kV indoor powerdistribution device. lt is used for power plants, substations and industrial andmining enterprises to receive and distribute electricity, it can control, protectand detect circuits, and can also be used in places with frequent operations.-S(B)H-M.RL AMORPHOUS ALLOY OIL-IMMERSED TRANSFORMER-S(B)H15-M.RL, S(B)H21-M.RL, S(B)H25-M.RL series amorphous alloy transformer products, the material of its amorphous alloy core is a kind of "amorphous metal", its physical state is that the metal atoms are arranged in disorder, and its material thickness is only 0.02mm. This material, which is completely different from the crystal structure of silicon steel sheets, is more conducive to magnetization and demagnetization, making this product have excellent no-load performance, and when it is connected to the grid in large quantities, it can achieve good energy-saving effects. This series of products is particularly suitable for places with insufficient power and large load fluctuations, and is an ideal replacement equipment for the vast distribution network in cities and rural areas.-YB port-series prefabricated box-type substation-This series of prefabricated substations are suitable for 12KV, 50Hz three-phase AC systems, and are configured with a capacity of 2500KVA or less in residential areas, commercial buildings, hotels, large construction sites, high-rise buildings, industrial and mining enterprises, and temporary construction sites. They are suitable for ring network power supply and radial terminal power supply. -YZB(C)-Port Prefabricated substation (prefabricated cabin)-In order to adapt to the modular construction concept of smart substations, follow the principle of coordination and unification of "safety, applicability, versatility, and economy", follow the idea of "standardized design, factory processing, and prefabricated construction", and combine the universal design "two types and one standardization" and full life cycle design and other standardized construction, the prefabricated cabin substation developed is also called the power container E-House. This product can quickly and flexibly support reliable power supply in any power consumption occasion. It provides users with plug-and-play customized power supply solutions, covering all aspects from preliminary planning, engineering design to installation and commissioning guidance.-New energy intelligent booster transformer (American style)-ZGS-40.5/0.4~1.14KV new energy intelligent step-up transformer (American style) is a product specially designed and developed by our company for the photovoltaic and wind power generation fields. The photovoltaic inverter export voltage is 0.4~0.8kV, and the wind turbine export voltage is 0.69~1.14KV. It is stepped up to 35kV by the combined transformer and then transmitted to the 35/110kV step-up station by the 35kV cable line to realize power generation and grid connection.-New energy intelligent step-up transformer (European and Chinese style)-YB(H)-40.5/0.4KV~1.14KV new energy intelligent booster transformer (European/Chinese style) is a product specially designed and developed by our company for the photovoltaic and wind power generation fields. The photovoltaic inverter outlet voltage is usually 0.4~0.8kV, and the wind turbine outlet voltage is usually 0.69~1.14KV. It is boosted to 35kV by the prefabricated substation and then transmitted to the 35/110(220)KV booster station by the 35kV cable line to achieve power generation and grid connection.-Intelligent power distribution products-Standardized station terminals can be divided into centralized and decentralized types in terms of structure. They are mainly used in box transformers, ring network cabinets, switch stations and distribution rooms. They can cooperate with remote master stations or terminals to complete medium-voltage line fault identification, isolation and power supply restoration in non-faulty sections.-DC-DC Module KE-5123-The iEMS intelligent distribution cabinet digital twin system is an intelligent distribution cabinet solution used in industries such as industry, commerce and urban infrastructure.-Energy system monitoring device KE-5102-It can be widely used in various occasions of power and new energy power generation, and communicate with various equipment, sensors, instrument SCADA systems, etc. to realize data collection, data forwarding, protocol conversion and other functions.-Energy storage boost converter-Meets voltage levels of 35kV and below, capable of island operation, primary frequency regulation, and supports high and low voltage ride-through-Intelligent power distribution products-The standardized feeder terminal adopts a cover-type structure and is mainly used in medium-voltage overhead distribution lines. It forms a primary and secondary integrated pole-mounted switchgear with the pole-mounted circuit breaker, and can cooperate with the remote master station or terminal to complete the functions of medium-voltage line fault identification, isolation and restoration of power supply to non-fault sections.-Intelligent power distribution products-Colin Electric has the independent R&D, production and service capabilities for primary and secondary products, and provides overall solutions for power systems. Currently, Colin's integrated primary and secondary products have covered 10 provinces/autonomous regions/municipalities in the country, 5 provinces and 2 cities of the Southern Power Grid, a total of 256 cities, and has accumulated rich operation and management experience.-Energy storage monitoring and energy management system iEMS-S8000-The energy storage monitoring and energy management system (EMS) is the core of the coordinated control of the entire energy storage system. EMS coordinates and controls all devices in the energy storage system, manages and counts the charging and discharging power of the energy storage system and the operating status of each component of the energy storage system, regulates and controls the energy storage system, and collects relevant operating parameters.-DC EV CHARGER-KE-6720 DC charger is a new energy electric vehicle fast charging device independently developed by our company. It can safely, efficiently, quickly and reasonably supply electric energy to electric vehicle power batteries. It is widely used in enterprises, institutions, public transportation, public parking lots, large shopping malls, logistics and other places.-DC EV CHARGER (STATE GRID STANDARD)-The KE-6720 DC charger (State Grid standard) meets the standardization requirements of the State Grid Corporation, fully considers the operating status and development trend of charging facilities, and realizes unified design and standardized management of charging equipment by standardizing the electrical principles, special component design, general device selection, appearance structure, structural layout, equipment installation, etc. of DC charging equipment, thereby comprehensively improving the compatibility, reliability and maintainability of charging equipment.-COMPACT CHARGER STATION-The box-type charging and substation, based on the actual installed capacity of the charging station and taking full account of the nature of the charging station, realizes the integration and modularization of power distribution and charging, occupies a small area and is easy to centrally control. It can effectively reduce the safety hazards of the power grid, equipment, and users, improve charging efficiency and economy, improve the operating efficiency of the transformer, effectively meet the flexible regulation of charging, and adjust the charging energy size according to the actual situation of the user. The box-type charging and substation consists of a high-voltage cabinet unit, a transformer unit, a charging module unit, and a split charging pile.-HIGH-FREQUENCY CHARGING MODULE-The KE-EVR1K070 high-frequency charging module is an essential module in the DC charger of new energy electric vehicles. It can convert AC power into DC power and provide safe, efficient, fast and reasonable power supply to the power battery of electric vehicles.-S-M STACKED IRON CORE OIL-IMMERSED TRANSFORMER-S13-M, S20-M, S22-M series fully sealed oil-immersed power transformers have the advantages of low loss, low noise and high efficiency, which can achieve good energy-saving effects and reduce pollution. Compared with ordinary oil-immersed transformers, fully sealed transformers have eliminated the oil storage cabinet. The change of oil volume is automatically adjusted and compensated by the elasticity of the corrugated sheets of the corrugated oil tank. The transformer is isolated from the air, preventing and slowing down the deterioration of oil and insulation aging, enhancing operational reliability, and achieving normal operation without maintenance.-SC(B)□ DRY-TYPE TRANSFORMER-SC(B)12, SC(B)14, SC(B)18 series resin insulated dry-type transformers have strong thermal shock resistance, large overload capacity, flame retardancy, high fire resistance, and insensitivity to humidity and dust, which makes them widely adaptable. This series of products is most suitable for harsh environments with high fire protection requirements, large load fluctuations, and dirt and humidity.-COMPACTED TRANSFORMER FOR RENEWABLE ENERGY SYSTEM-The characteristic of new energy transformer is that the transformer body, high-voltage load switch, protective fuse and other equipment are designed in a unified manner and placed in the same closed oil tank. The insulating oil of the transformer is used as the insulation and heat dissipation medium of the entire product. The oil tank adopts a fully sealed structure, which has the advantages of small size, light weight and easy installation. The product can be equipped with low-voltage power distribution, metering, and compensation devices as needed. This series of products is widely used in residential areas, public places, industrial and mining enterprises, wind power generation, photovoltaic power generation and other occasions.-AIR COOLING BATTERY CABIN-The air-cooled battery compartment is composed of a 20/40-foot customized container, which contains an air-cooled PACK, BMS battery management system, air-conditioning unit, fire protection, etc.-836KWH LIQUID COOLING OUTDOOR BESS-261KWH LIQUID COOLING OUTDOOR BESS-215KWH LIQUID COOLING OUTDOOR BESS-AIR COOLING OUTDOOR BESS-1500V THREE PHASE PCS-MODULAR PCS-MODULAR PCS-MODULAR PCS-1500V STEP-UP CSS INTEGRATED WITH PCS-KE-5111 Battery Array Management Unit (BAMU)-KE-5112 Battery Cluster Management Unit (BCMU)-KE-5113 Battery Management Unit (BMU)-KE-51130T Combustible Gas Detection Unit-High voltage control box-AIR-COOLED PACK-LIQUID-COOLED PACK-DC-DC MODULAR-KE-5102 ENERGY STORAGESYSTEM MONITORING DEVICE-It can be widely used in various occasions of power and new energy power generation, and communicate with various equipment, sensors, instruments, SCADA systems, etc. to realize functions such as data collection, data forwarding, and protocol conversion.

+ 65 85826688

sales@sps.com.sg

Language

Enter Keywords

Select Language

English

Indonesia

Language

List

Phone

+65 85826688

sales@sps.com.sg

Top

Online

Contact now →

Contact now →

List

Phone

+65 85826688

sales@sps.com.sg

Top

SMART GRID

INTELLIGENT ENERGY STORAGE

TRANSFORMERS

NEW ENERGY

Company Profile

Qualifications

Video

Production Line

Company News

Industry News

Technical Documents

market

material

Online message

Contact information

Product Search

SMART GRID

INTELLIGENT ENERGY STORAGE

TRANSFORMERS

NEW ENERGY

Home

Products

COMPACT CHARGER STATION

NEW ENERGY

COMPACT CHARGER STATION

Product Introduction

The box-type charging and substation, based on the actual installed capacity of the charging station and taking full account of the nature of the charging station, realizes the integration and modularization of power distribution and charging, occupies a small area and is easy to centrally control. It can effectively reduce the safety hazards of the power grid, equipment, and users, improve charging efficiency and economy, improve the operating efficiency of the transformer, effectively meet the flexible regulation of charging, and adjust the charging energy size according to the actual situation of the user. The box-type charging and substation consists of a high-voltage cabinet unit, a transformer unit, a charging module unit, and a split charging pile.

Product Image

Quick access

Product Brochure

Product Manual

Electrical Parameters	KE-XBC360	KE-XBC500	KE-XBC630	KE-XBC720
Power Supply Voltage	10kV
Rated Input Capacity	360kVA	500kVA	630kVA	720kVA
High - supply High - metering / Remote Meter Reading	Yes
Reactive Power Compensation / Power Quality	(Optional)
Dual - circuit Power Supply	Dual - circuit Power Supply (Customized by User)
DC Pile Output Voltage	200V - 1000V
DC Gun Output Power	30kW/60kW/120kW/180kW/250kW
AC Output Voltage	Single - phase 220V or Three - phase 380V
AC Output Current	16A/32A/63A (Customized by User)
Payment Function	Card Swiping, Mini - Program, APP
Leakage Protection	Yes
Lightning Protection	Class C + Class D Lightning Protection
Smoke and Fire Monitoring	(Optional)
Video Anti - theft Monitoring	(Optional)
Ambient Temperature	-25°C - 50°C
Humidity	95% No Condensation
IP Grade	IP54
Refrigeration System	Yes